Quick Start Guide
4 Wire Settings
After connecting the two systems with the network cable, configure each HUB Base’s line sequence by
entering "4 Wire Settings" and selecting "Line sequence switching".
Set the first HUB Base to “Standard mode” and the second HUB Base to “Cross mode”.
Enter 4 Wire menu, and select
Line sequence switching
Set to Standard mode
HUB
❶
4 Wire
Settings
HUB
❷
Enter 4 Wire menu, and select
Line sequence switching
Set to Cross mode
4 Wire
Settings
10
Two Systems Cascade via IP Network
Use a standard network cable to connect the two systems through the RJ45 network port. Either one of the
two RJ45 network ports on the HUB works.The network cable is generally up to 300 meters long.
300m network cable
HUB Display Interfaces
