HDMI TX
HDMI RX
HDMI PORT
Video Input
Video Output
IR PORT
IR Input
IR Output
Fiber Port SC
Optic-fiber Data Transmission
RESET KEY
Hold down the key for 8 seconds after power on, the
model will restore default settings
2.2 Indicator led.
Indicator led
Status
FX
Light On
The transmission rate is correct
Light Off
The transmission rate is not correct
Link act
Light On
Fiber Link up
Flash
Packets of data are transmitting in the indicating port
Dpx
Light On
In the State of full-duplex
Light Off
In the State of half-duplex
3.0 Function Specification
HDMI 1.3/HDCP1.1 & 1.2
Both Optic-fiber transmission.
Support point-to-point mode, one point-to-many mode and cascaded transmission mode.
built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote
control.
Pure hardware design, just plug and play, no need to install extra software.
