Hollis ENVIRO-PRO Large, Owner'S Manual, Page: 32 / 48

32
INFLATOR AND DUMP VALVE USE
W LP Hose Connector
X Power Inflator Button
Y Mouthpiece
Z
Deflate / (Manual Inflate) Button
Working Pressures: min = 120 psi (8 Bar), nominal = 140 psi (9 Bar),
max = 160 psi (11 Bar)
NOTE Install the inflator hose to your regulator per your regulator’s instructions, or have an
authorized technician attach the LP hose to the regulator first stage.
MANUAL INFLATION
To manually inflate the bladder, depress the manual inflation button and blow into the mouthpiece.
Be sure to release the manual inflation button before you remove your mouth from the mouthpiece to
ensure you do not lose any air through the mouthpiece. Repeat until desired buoyancy is achieved.
POWER INFLATION
To power inflate the bladder, depress the power inflator button. This can only be achieved when the
low pressure inflator hose is connected and under pressure from the regulator 1st stage. Use short
bursts of air to inflate the bladder being careful not to add too much air.