HMPRO36AD OPERATOR’S MANUAL
14
www.holemaker.com
PRO 36 AD
To install the assembly, unplug the machine from the power source, raise the
cover,
and then rotate the handle to the left (
1
,
Fig. 7) to lower the standard TCT quill
assembly as much
as
possible.
Next,
remove
the
handle,
use
pliers
to
remove
the
retaining rings (
2
), and
then
push
out
the
shaft
(
3
)
by
16
mm
(10/16’’),
which
will
expel
the TCT
quill
assembly
(
4
). Insert the HSS quill assembly (
5
), push in the shaft (
6
), and
then place the retaining rings back in place (
7
).
Fig. 7.
Installing the HSS quill assembly
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
16
1
7
2
3
4
5
6
2
7
