11
H-TAG Connected with Fingerprint Reader:
For example:
Connect F2 as the fingerprint reader to H-TAG, it is of two steps to enroll the valid fingerprint.
Step 1: Add the Fingerprint (A) on F2
Step 2: Add the same Fingerprint(A) on H-TAG:
1.
Enter Program Mode : *
(Master Code) #
2.
OR
2.
1 (Press Fingerprint A once on F2) #
(ID auto allocated)
1 (User ID) # (Press Fingerprint A on F2) #
(Select specific ID)
3.
Exit:
*
H-TAG Connected with Keypad Reader:
The keypad reader can be 4 Bits, 8 Bits (ASCII), or 10 Bits output format.
Choose the below operation according to the PIN output format of your reader.
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. PIN input bits
8 (4 or 8 or 10) #
(factory default is 4bits)
3. Exit
*
Remarks:
4 means 4 bits, 8 means 8 bits, 10 means 10 digits virtual number.
•
Add PIN Users:
To add PIN users, after enter into programming mode on H-TAG, PIN(s) can be input/ added on
either H-TAG controller or the external Keypad Reader.
•
Delete PIN Users:
the same way as add users.
