DM-14
Monosplit “Wall” Personal Line Constant Speed - Section 6: Diagnostic & Maintenance
!
About 2 hours
Ordinary maintenance: at the end of season
At the end of each season, if you foresee a period during which the air conditioner is not used,
please carry out the following devices:
Remove remaining humidity from Indoor Unit
1.
Operate system for some hours, by selecting “FAN” only
mode and “HIGH” fan speed.
This may allow to remove remaining humidity from Indoor
Unit, and reduce the risk of forming of mould and bad
smells during time when system is not used.
Disconnect the system
2.
Stop the system by pressing “ON/OFF” on remote control.
Move power supply main switch to “OFF” or “0”.
Disconnect the plug from the power socket.
Remove, clean and reinsert air filters on Indoor Unit
3.
In this way, Indoor Unit will be ready for use in following
season.
Clean Indoor Unit and Outdoor Unit
4.
Clean Indoor Unit and Outdoor Unit as it has already been
explained previously.
In particular, protect Outdoor Unit by a waterproof cover
that can be easily found on the market.
Remove batteries from IR remote control
5.
Carry out this operation so as to prevent acid from coming
out of batteries themselves. Acid may damage contacts
inside battery case.
Summary of Contents for HCND 261 G
Page 100: ...Notes 1 Monosplit Wall Personal Line Constant Speed Notes Notes ...
Page 101: ...Notes 2 Monosplit Wall Personal Line Constant Speed Notes Notes ...
Page 102: ...Notes 3 Monosplit Wall Personal Line Constant Speed Notes Notes ...
Page 103: ...Notes 4 Monosplit Wall Personal Line Constant Speed Notes Notes ...
