background image

OWNER'S MANUAL

HD-3400 ASSEMBLY

PAGE 43

HOIST FITNESS SYSTEMS

LIMITED LIFETIME WARRANTY 

 
     Hoist Fitness Systems warrants this product to the 

original purchaser

 to be free from defects in workmanship and/or 

materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it 
(at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal, transportation 
or reinstallation. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear. 
 

WARRANTY CLAIMS. All claims require: Model number, Serial number, Date of installation, and any 

information supporting the existence of the alleged defect. 

 

To complete Warranty Registration visit: 

www.HOISTFITNESS.com

 

and click on the Warranty Registration link 

 
Starting from the original date of purchase, normal wear and tear shall be considered as the following: 
 
     

COMMERCIAL USE:

 All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of belts, or 

cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body 
components are warranted for ten years, with structural moving parts warranted for five years. 
       
     

LIGHT COMMERCIAL USE

: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of 

belts, or cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body 
components are warranted for ten years, with structural moving parts warranted for five years. 
 
     

HOME USE

: All malfunctions of grips, paint, and chrome that occur up to ten years; all malfunctions of electronic components, 

belts, cables, or upholstery that occur up to ten years; all malfunctions of pulleys, bearings, or bushings that occur up to ten years. 
The frame and all welded components are warranted for the life of the product. 

 
PLEASE NOTE THAT NOT ALL HOIST PRODUCTS ARE MADE FOR COMMERCIAL USE.  

Refer to the instructions page of 

your owners manual or consult with you fitness product dealer to establish if a product is made for commercial use or not.  Using a 
non-commercial product in a commercial setting can result in serious injury or death!  Hoist Fitness Systems sole responsibility 
shall be to repair or replace the component within the terms stated above. Hoist Fitness Systems shall not be liable for any loss or 
damage of any kind including any incidental or consequential damages resulting, directly or indirectly from any warranty 
expressed or implied or any other failure of this product. 

 
LIGHT COMMERCIAL USE

: Our Light Commercial warranty applies to facilities that 

DO NOT

 charge monthly membership dues 

and where the equipment would be used by 

no more than 50

 people per day. Examples of Light Commercial facilities include 

hotels, apartment complexes, personal training studios, fire stations, police stations, etc., that meet the criteria stated above.   
 

WHAT IS NOT COVERED BY THIS WARRANTY:  

Hoist's sole obligation under this warranty is limited to either repair or 

replacement of parts, subject to the additions below. This warranty neither assumes nor authorizes any person to assume 
obligations other than expressly covered by this warranty.  
 

NO CONSEQUENTIAL DAMAGES

: Hoist is not responsible for economic loss; profit loss; or special, indirect, or consequential 

damages. 
 

WARRANTY IS NOT TRANSFERABLE:

 This warranty is not assignable and applies only in favor of the original purchaser/user 

to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, 
expressed, implied or statutory, except the one (1) and five (5) year warranties described above. These warranties are exclusive 
and in lieu of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no 
warranties which extend beyond the description on the face hereof. 
 

TRANSPORTATION COSTS:

 Hoist will accept parts covered under this warranty freight collect, provided that shipment has 

received prior approval. Hoist is not responsible for any other transportation costs, but will ship freight collect parts either repaired 
or replaced under these warranties. 
 

Hoist Fitness Systems 
11900 Community Rd. 

Poway, CA. 92064 

(800)548-5438 

PLEASE KEEP THIS FOR YOUR RECORDS

Summary of Contents for HD-3400













































Reviews: