PAGE 41
H4400-B ASSEMBLY
OWNER’S MANUAL
OWNER’S MANUAL
OWNER’S MANUAL
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
-
WRENCH TIGHTEN HARDWARE
-
INSTALL CABLE AND PULLEYS AT THE SAME TIME
-
SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
LANYARD INSTALLATION:
DURING INSTALLATION OF YOUR
UNIT, ENSURE THAT THE LANYARD
RING IS INSTALLED BETWEEN THE JAM NUT
AND CABLE BOLT AS
SHOWN BELOW
FINE TUNING
LOOSEN JAM NUT AND THREAD BOLT IN/OUT TO GIVE THE
CABLE PROPER TENSION. RE-TIGHTEN JAM NUT.
WARNING — CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8” WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.