3
Step #3:
Installing the Speaker:
With the cabinet removed from the bike, undo the 4 screws that hold
the factory speaker to the cabinet and put these screws aside. Pull the
factory speaker away from the cabinet and carefully take off each
speaker wire by un-doing one at a time. Take a Wild Boar Audio
speaker and attach the speaker wires noting the factory speaker wire
connectors will lock into place on the speaker. Sit the Wild Boar Audio
speaker into the cabinet noting the speaker MUST be oriented so that
the wires are in the bottom (6 o’clock) position so the speaker frame
will not touch the small locater peg that sticks out from the face of the
cabinet. If the speaker is not placed correctly, the speaker may not
“seal” correctly to the cabinet and the bass response will suffer! Using
the supplied screws (which are longer than the factory screws), attach
the new speaker to the cabinet.
Repeat Step #3 for the second cabinet
Make sure to plug the power cable back into the power port/cigarette
lighter assembly on the brake side. If the bike has the CB module, make
sure to re-install the antenna cable and main harness. Let the factory
speaker wires that come out of the cabinets “hang” for now.
