Hogtunes Wild Boar Audio Wbass Kit Installation Manual Download Page 10

 

Please Note: Having your radio re-flashed to  

“4 Speakers No Amplifier” in all cases is the preferred condition. 

With this flash, and the amp set to “Position A” You will  

get the best volume and your radio’s AVC   

(Automatic Volume Control) will work.

Position “B” 

 

 If you have a Non CVO Street Glide and cannot get to a dealer for the 

re-flash, set the amp to Position B. This is a “usable” setting, but you 

will not be able to have your bass in the middle position without some 

“break up” at high volume. At high volume, you may also experience 

either side of the amplifier turning off momentarily. The bikes AVC  

(Automatic Volume Control) will work. The correct flash for “Position A” 

is recommended for the best performance.

Position “C”

 

 If you have a Non CVO Street Glide and are replacing a previously 

installed factory amplifier, or have a CVO model and are replacing the 

fairing amplifier, the radio should have the “2 speaker 1 amp” flash. 

Setting the 3 position switch on the side of the amp to “Position C” will 

work in this case, however, the radios AVC (Automatic Volume Control) 

will NOT work. The correct flash for “Position A” is recommended for the 

best performance.

Final Installation Notes:

1)     Many users will store music on a hand held type player and use that as the 

music source for the bikes audio. PLEASE NOTE: If you “borrow” music files 

from certain sites, they typically sound poor. Using a good quality file will only 

make the system sound better!

2)     Many users will take advantage of the convenience of “streaming” their 

music to the radio using Bluetooth®. It should be noted that it was found that 

plugging in the music device using the radios USB cord sounds better and 

plays louder than using Bluetooth®.

3)     Assuming you have the “4 Speaker No Amp” flash and the 3 position switch 

on the side of the amp is set to “A”, we suggest having the bass on the radio 

set to 1 or 2 bars above the center position, and the treble set to one or 2 

bars below the center position. If you have bass heavy music, and are hearing 

some “break up” there is nothing wrong with lowering the bass control on 

the radio till everything sounds “right”. You can set the bikes AVC (Automatic 

Volume Control) however you like it. 

8

Summary of Contents for Wild Boar Audio Wbass Kit













Reviews: