background image

2

Thank you for choosing the Hogtunes REV 450U KIT-RM speaker and amplifier 
kit for “Rushmore” platform Ultra Classics. Since positive word of mouth is the 
best way to grow our business, we want your new system to work as well as it 
was designed to. If you have any questions or concerns, we are here to help.

The installation will be done in 3 major steps.

 
 

Step 1:

  Changing out the Front speakers 

 

Step 2:

  Changing out the Rear speakers 

 

Step 3:

  Installation of the amplifier

Please identify the two pairs of speakers now. Model 362F-RM (with larger 
magnets) are for the front and 362R-RM (smaller magnets) are for the rear.  
The rear speakers will fit in the front location but the front speakers will NOT 
fit in the rear location. If you do not identify the speakers now, there is a  
serious chance wrenches and expletives will be flying soon! 

Hogtunes Contact Information

 

Email: [email protected] 

Tel:  705-719-6361 

A video version of this manual is available at  

www.hogtunes.com

 If you still need  

assistance, please consider a professional  

installation by your motorcycle dealer.

Summary of Contents for NCA 450U Kit-RM













Reviews: