For tension testing and compression testing not involving direct force application with the hand, the one hand
handle can be used in conjunction with appropriate test attachment being used for tension and compression
tests. The one hand handle can also be used with two hands in certain situations.
To insert handle, push aside strap on underside of gauge. The screw insert is located on the underside of the
gauge. Thread the screw portion of handle into the insert and tighten until snug. Do not over tighten. See
Images I below for attaching handle to gauge.
Image I
Below are examples of the ergoFET with one hand handle using two hands to perform a push test, lifting to
weigh contents of bucket, and pull test. See Images J, K, and L below.
Image J
Image K
Image L
Page 11
