Hofmann Snap-on Y2k, Service Manual

Page: 84 / 99

Seite 84 von 99
C12 Counter Indication
Displayed on selection:
A 6-digit number is displayed across both displays (0 – 999,999).
This number indicates the total number of measurement runs performed.
Step 1 options:
Pressing the PLUS or MINUS keys will display another counter. Four counters are available. These are;
Counter 1 (C1): Total spins counter.
Counter 2 (C2): Spins since last calibration counter (can be reset by C43).
Counter 3 (C3): Total user spins counter.
Counter 4 (C4): Total service spins counter.
Pressing the PLUS and MINUS keys together at any stage will act like an Escape key and exit the code.
Pressing the RETURN key will also exit the code.
C14 User Calibration
See User Calibration Description.
C21 Displaying Machine model and software version.
Displayed on selection:
Machine model name.
Step 1 options:
Holding down the PLUS or MINUS key displays the software version.
Pressing the PLUS and MINUS keys together at any stage will act like an Escape key and exit the code.
Pressing the RETURN key will also exit the code.