Hofmann Smart, Instruction Manual

Page: 13 / 24

2. Setting up the scale
CAUTION
Avoid installing the scale in direct sunlight, that may cause discolor-
ation or malfunctions. Place your scale on a firm weighing table so that
the scale is in level. (The scale will not perform accurately when it is
not in level.)
WEIGHING
Before weighing
Error messages
EEEE: Overload
: Low battery
Weighing procedures
1. Press [I/O] to turn on the scale.
When the power is turned on the display will show all segments
(88888) for a few seconds and then "0" will appear on the display.
2. Select the weighing unit with [MODE].
Press [MODE] to select the weighing unit, "kg" or "g".
3. Start weighing
Place the objects to be weighted onto the weighing platform.
When the reading becomes stable, the weighing is displayed.
HOLD FUNCTION
The “hold” function allows the weighing of large boxes or items that hang
past the edge of the platform and cover or block the scale display,
preventing the weight from being read. Once the
HOLD key is pressed,