Hofmann A2707, User Instructions

Page: 26 / 44

26
EN
Cleaning Plan Observe the operating instructions
Working steps Detergent Process Cleaning unit Note
Preparatory Close cutting
thickness, pull the
mains plug
Dismounting of
the removable
parts According to the
operating instruc-
tions
Rough cleaning Manual Remove the pro-
duct remainders Plastic scraper /
Plastic spatula Start directly after
knife end, also in
case of removable
parts
Cleaning P3 topax 56 RAN
fat solvent Pril
with disinfectant After thorough
rinsing with water
(max. 40°C) reac-
tion time appr. 20
minutes Brush, tub,
cleaning cloth,
hand spray All dismounted
and fixed machnie
parts
Desinfaction addi-
tional measure P3 alcodes Manual spray Disposable
cleaning cloth,
manual spray Additional
protection, spray
distance appr.
30 cm
Rinsing Drinking water Temperature max.
40°C Disposable
cleaning cloth,
hand spray, water
hose Other removable
machine parts
Checking Visually for optical
cleanliness
Drying Rub dry, dry in air Disposable
cleaning cloth Machine, dis-
mounted parts
Care Food oils with
H1 approval, e.g.
Henkel P3, service
oil Apply, spray Disposable
cleaning cloth,
manual spray Rinse parts in con-
tact with product
to be cut prior to
work
Assembly In reverse
sequence to disas-
sembly Staff needs clean
and disinfected
hands
Safety measures Cover machine
when cleaning
surrounding area
with spray guns
The data refer to a single-shift operation.
The safety and product data sheet supplied with the detergents and disinfectants have to be observed.