32
ENGLISH
Use and maintenance manual
9.1.3 Replacing fuses
Some protection fuses are located on the power board (see wiring diagrams) accessible by dismantling the weight
shelf). If fuses require replacement, use ones with an identical current intensity.
9.1.4 Cleaning the screen
Use a soft cloth and NON-ABRASIVE commercial glass/plastic cleaning spray or ethanol or natural detergents.
DO NOT USE:
▪
Organic solvents type nitro thinner
▪
Turpentine
▪
Petrol
▪
Trichloroethylene
▪
Acetone
10.
Disposal
The instructions in this chapter are indicative. Refer to the regulations in force in the country where
the equipment is used.
10.1 DISPOSING OF THE BALANCER
The balancer must be disposed of after dismounting the various parts.
For disposal operations, as well as wearing the Personal Protective Equipment indicated in the INSTALLATION
MANUAL, refer to the instructions and diagrams in this manual. If necessary, request specific information from the
manufacturer.
Once you have removed the various parts and components, separate them into the different types of materials ac-
cording to the differentiated waste disposal regulations in force in the country where the machine is dismantled.
If the various components must be stored before being taken to the dump, make sure to keep them in a safe place
protected from atmospheric agents in order to prevent them from contaminating the ground and the water table.
10.2 DISPOSING OF ELECTRONICS COMPONENTS
Community directive 2002/96/EC, assimilated in Italy with legislative decree n° 151 of 25th July
2005, requires electrical and electronic equipment manufacturers and users to comply with a number
of obligations concerning the collection, treatment, recovery and disposal of this waste.
Please scrupulously comply with these waste disposal regulations.
Remember that abusive dumping of this waste leads to the application of the administrative penal-
ties established by current law.
Disposal
Summary of Contents for M420
Page 36: ......
