15
FE
FI
ENGLISH
Use and maintenance manual
Use of the wheel balancer
6.2 BALANCING WITH ADHESIVE WEIGHTS (ALU)
6.2.1 Wheel dimensions setting
Using the dedicated grip, move the gauge tip up against the inside of the rim and make two consecutive measure-
ments starting from the inside (FI) as shown in the figure. The two preselected positions coincide with the point
where the counterweight is to be applied.
When the gauge is pulled out (
SPOTTER, OPTIONS
), the spotter projects a laser reference inside the rim at
6 o’clock. The light point indicates the left-hand side of the position where the counterweight is to be applied.
When the dimensions have been acquired, the laser reference point emitted by the spotter flashes fast accompa-
nied by a beep if the acoustic signal is enabled (
MENU - ACOUSTIC SIGNAL
).
Set the gauge to the rest position.
The balancing machine automatically interprets the presence of a rim with adhesive weight correction:
Summary of Contents for M420
Page 36: ......
