manualshive.com logo in svg

Hoffrichter VECTOR et Cpap, User Manual, Page: 24 / 40

Share
Download
Hoffrichter VECTOR et Cpap User Manual Download Page 24

PATIENT MENU

Press and hold the enter key (at least 1 second) to
move to the programming mode. The Patient menu
will now appear on the display. In the Patient menu
you can set the following parameters:

1. Wake time

In this menu item you can set and change the 
wake time.

After pressing the 

key again the hour of the 

wake time will start flashing. Now you can 
change it by pressing the 

and 

keys. After 

pressing the 

key again the minute of the 

wake time will start flashing. Now you can 
change it by pressing the 

and 

keys. 

Pressing the 

button again ends the input and 

you get back to the menu. Changing the wake 
time will automatically activate the alarm clock. 

After leaving the menu the alarm clock can be 
activated and deactivated with the help of the 

and 

buttons. Press 

to activate the 

alarm function. The display briefly shows the 
wake time allowing you to verify it. 

After that a bell symbol in front of the time 
display shows that the alarm function is 
activated.

Press 

to deactivate the alarm function. 

The bell symbol disappears.

2. Reset filter

In this menu item the filter counter can be 
reset. This function should be used at every 
filter change so that always a current value is 
displayed. 

24

VECTOR et

CPAP

13 

CPAP

CPAP

CPAP

CPAP

CPAP

CPAP

Summary of Contents for VECTOR et Cpap









































Reviews:

No comments