manualshive.com logo in svg

Hoffrichter AutoCPAP, User Manual, Page: 39 / 100

Share
Download
Hoffrichter AutoCPAP User Manual Download Page 39

 

Device functions

 39

The point 2 has two different menus:

 

•

Standard

 

 menu

 

•

Complete menu

The standard menu contains the menu items relevant 

to patients. The complete menu contains all menu 

items of the standard menu as well as all menu items 
required for setting the therapy. This menu is primar-
ily intended for physicians and trained medical staff.

 To switch between the menus, 

fi

 rst press the enter key 

. Then hold both the selection keys 

 and 

 down 

at the same time for a prolonged period. The display 
shows the message:

 or

If during programing you have not pressed a key 
for 30 seconds, the standard or complete menu 
exits automatically for security reasons. If a modi-

fi

 ed value is not con

fi

 rmed by pressing the enter 

key and the standard or complete menu has exited, 
the original value is retained. 

/%2!

/* . !*1

/%2!

+),(!/!!*1

Summary of Contents for AutoCPAP





































































































Reviews:

No comments