Operating and Maintenance Manual
©
HOFFMANN MU3-P & MU3-PD
• Version 7.205.00 • 01-2018
21
14.3
“Waking Up” display from battery saving mode
Both digital displays will enter “sleep mode” after a few minutes to extend battery life.
Displays are switched back on to active mode every time any button is pushed and anytime either the height
adjustment bar or the center fence plate is moved.
The length of time until display enters sleep mode is factory set and cannot be changed. However, sleep mode
can be turned off in Parameter 4. Please note that without sleep mode the battery life is grealty reduced.
14.4 Parameter Listing for ELGO IZ14E Digital Liquid Crystal Display
Parameter
Specification
Default Setting
P01: A
Counting Direction
0
A = 0
positive counting direction
A = 1
negative counting direction
P02: A
Display Mode
0
A = 0
display “mm”
A = 1
display “inch”
A = 2
display “m”
A = 3
display “°”
A = 4
no symbol displayed
P02: A
Decimal Point --
can be set from 0….4
2
P04: A
Sleep Mode
01
A = 00 display always on (not recommended)
A = 01 sleep mode on
P05: ABC
Push Button Lock Options
000
A “SET”
0
– unlocked
1
– locked
B “Incr/ABS”
0
– unlocked
1
– locked
C “*”
0
– unlocked
1 - locked
P07: A
Resolution
0
A = 0
resolution 0.01mm
A = 1
resolution 0.1mm
P08:
Multiplication Factor
1.0000
(0.0001….9.9999)
P09:
Reference Value (-
9.9999…+9.9999)
0.0
P10:
Offset # 1
0
P11:
Offset #2
0
P12:
Offset #3
0
P13: A
Offset Configurations
3
P99:
Software Version
x.xx