Operating and Maintenance Manual
©
HOFFMANN MU3-P & MU3-PD
• Version 7.205.00 • 01-2018
10
6.5 Cleaning agents and chemicals
Review and observe all safety rules provided by the chemicals manufacturer while working with
cleaning agents and other chemicals. Read and understand the Material Safety Data Sheets (MSDS)
provided by the manufacturer and follow all safety precautions described therein.
Always wear proper protective gear, including safety glasses and gloves, when using cleaning
agents, degreaser, etc.
Do not eat, drink or smoke when using chemicals.
Dispose of used cleaning agents and other chemicals in accordance with all State and local laws.
6.6 Remaining Risks
If the operator does not pay attention, it is possible to squeeze ones’ fingers when loading and
manually clamping a work piece. Never place your fingers under the clamp pads of the material
clamp pad or in the path of the router bit.
7 Noise Emissions
The machine generates a work place Sound Pressure Level (SPL) of approx. 75.3 dB(A)
when processing a work piece.
Local conditions could increase the SPL, which could cause hearing damage or loss.
The machine owner must provide suitable protective gear to protect employees from
hearing damage, as required by local and state laws and OSHA regulations.
Notes:
All listed values are measured noise emission levels
– they are not necessarily safe working environment levels.
Local conditions, the proximity of walls and ceilings, the type of wall, ceiling and floor material as well other
equipment in close proximity could affect the total noise emissions at the work place.
The SPL values are provided as information only and it is recommended that the machine owner measure the
actual local noise levels after installation.
Machine is owner is responsible for providing suitable protective gear depending on total noise emissions and
local and state laws and regulations.
All OSHA regulations pertaining to noise protection are to be adhered to.