hofflights.com
12
INSTALLATION MANUAL
IMH-104 v.01
PASCUA
Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions
before using the product.
1. To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan
installation or before servicing the fan or installing accessories.
2. Read all instructions and safety information carefully before installing your fan and save these instructions.
3. Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are
unfamiliar with electric wiring, please use a qualified and licensed electrician.
4. Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least 7,5 feet of
clearance between the floor and the fan blade tips. The fan should be mounted at least 30 inches from walls or other
upright structures.
5. WARNING: The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least
100 pounds. To reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable
for fan supported and use mounting screws provided with the outlet box. The box must be supported directly by the
building structure.
6. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan
support” and use mounting screws provided with the outlet box most outlet boxes commonly used for the support of
lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in
doubt.
7. After installation is complete, check that all connections are absolutely secure.
8. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet
box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box.
9. WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control
device, or rheostat.
10. Do not separate the reverse switch until the fan has come to a complete stop.
11. Do not insert anything into the fan blades while they are rotating.
12. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during
assembly or after installation. Do not insert objects in the path of the blades.
13. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
14. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
THANK YOU FOR YOUR PURCHASE
SAFETY TIPS
WARRANTY
MOTOR
10
2,3
m
IP20
DC
MOTOR
5
SPEED
ABS
BLADES
M
15-20
m2
W
Motor
V
RPM
Airflow
(CFM)
ØxH (mm.) Kg
5.0150.0211
32
100-265
180
5500
1320x305
4,2
WARRANTY
MOTOR
10
2,3
m
IP20
DC
MOTOR
5
SPEED
ABS
BLADES
M
15-20
m2
3K
4K5
6K
W
Motor
V
RPM
Airflow
(CFM)
W
LED
K
CRI ØxH (mm.) Kg
5.0150.1211
32
100-265
180
5500
18
3K-4K5-6K
80
1320x305
4,5
