3
28
To empty the water tank, unscrew and remove the cap, then tilt the appliance
(for example, above a kitchen sink) to remove the water.
3. Remove the water tank cap.
4. Fill the measuring cup with distilled water.
5.
Using the funnel, fill the water tank with water - do not pour more than 350
ml into the tank.
6. Insert the tank cap and turn it clockwise to the limit.
7.4 Operation.
Attention!
Before using the appliance, remove dust from the surface to be cleaned with a
vacuum cleaner or a broom.
1.
Make sure that the supply voltage in the socket matches the one specified
on the rating plate of the appliance and in the instruction manual.
2. Make sure that the I/O switch is in the “O” (OFF) position.
3. Insert the plug into the outlet socket.
4. Move the I/O switch to the “I” (ON) position. The indicator light will turn
green.
5. After ca. 30 seconds the appliance will be ready for operation.
6. Press the mop head against the surface with the handle to produce steam.
7. Release the pressure.
8. After use, empty the water tank.
Attention!
When there is no more water in the tank, the appliance does not produce
steam. Refill the water tank, exercising all due care. If there is no water in the
tank, the tool may become overheated.
Never pour cleaning agents, perfumes, oils or other chemicals into the water
tank. Such substances may damage the appliance and make it dangerous to
operate.
Use only distilled or boiled water.
Do not unscrew the water inlet cap when the appliance is being used.
Before you start filling or emptying the mop’s water tank, always disconnect
the appliance from the power supply
Summary of Contents for SM-9576
Page 1: ...INSTRUKCJA INSTRUCTION MANUAL MOP PAROWY STEAM MOP...
Page 2: ......
