3
31
+/- button once to switch the device to the lower suction power (it will become
quieter).
4. When vacuuming with the cleaning head, the white light on its base is lit. It
facilitates vacuuming in dark places.
5. At the beginning of device operation, the battery’s 4 indicator LEDs shine blue.
As battery capacity is used, and when it becomes insufficient, the number of lit
LEDs will turn off one by one. When all the LEDs go off, the battery is fully dis-
charged. The device will stop working and must be recharged.
6. The cleaning head is equipped with an overload protection device. When the
brush becomes jammed, the thermal switch disconnects the power supply,
and the head stops working. If this happens, switch the device off immediately,
inspect the brush, remove the foreign matter causing the jam, then wait for the
device to cool down completely before you switch it on again.
7.
When you finish vacuuming, turn off the device by pressing the on/off button.
8.1 BASIC RULES
Correct and regular cleaning will improve the safety of the product and extend its
service life.
Warning! Switch off the device, unplug and let it cool down before cleaning and
maintenance to avoid electric shock and burns.
Caution! Do not clean the device with any chemicals, alkali, abrasive, or disinfecting
agents, as they may damage the surface of the device.
8.2 DEVICE CLEANING
• Wipe the handle with battery base, the battery, and the motor with a dry cloth.
• Wipe the dust container, the suction pipe, the cleaning head, and the crevice
brushes with a damp cloth, then leave it to dry.
8.3 EMPTYING THE DUST CONTAINER
1. Make sure that the device is turned off and not connected to the charger.
2. Disconnect the device from the suction tube with the cleaning head by pressing
the lock release button (4). Store the tube with the cleaning head in a safe place.
8. CLEANING AND CARE
Summary of Contents for POJM200342
Page 2: ......
