3
28
3. Using your foot, press the detergent dispensing button to spray the detergent
over the surface being cleaned.
Attention! If the nozzle does not spray the detergent, wipe the nozzle with a cloth.
If that does not solve the problem, insert the tip of a flat-blade screwdriver (not
included) in the nozzle opening and rotate it slightly to the right and to the left.
Attention!
If there is no more water in the tank, the appliance will not produce steam. Refill
the water tank, exercising all due care. Without water in the tank, the appliance
may become overheated.
Never pour cleaning agents, perfumes, oils or other chemicals into the water
tank. Such substances may damage the appliance and make it dangerous to
operate.
Use only distilled or boiled water.
Do not open the w ater inlet cap when the appliance is being used .
Before you start filling or emptying the mop’s water tank, always disconnect
the appliance from the power supply.
To empty the water tank, open the cap, then tilt the appliance (for example, above
a kitchen sink) to remove the water.
7.4 Operation
Attention!
Before using the mop, use a vacuum cleaner or a broom to remove dust from
the surface to be cleaned.
1.
Make sure that the supply voltage in the socket matches the voltage specified
on the rating plate of the appliance and in the instruction manual.
2. Make sure that the I/O switch remains in the “O” position.
3. Insert the plug into an outlet socket.
4. Press the I/O switch to turn the appliance on. The indicator light will turn
green.
5. After about 18 seconds the appliance will be ready for operation.
6. Press the mop head against the floor surface with the handle to produce
steam.
Summary of Contents for POJM200094
Page 2: ......
