8. CLEANING AND STORAGE INSTRUCTIONS
CLEANING:
It is easiest to clean the appliance and its parts directly after use.
Do not use abrasives, wire wash cloths, alcohol-based products etc. Do not immerse
in water or clean in water.
1. Before cleaning the induction cooker, make sure that the plug is unplugged and the power
is off.
2. Use a mild detergent to remove dirt.
3. In the case of little dirt, simply wipe the device with a clean, damp cloth.
4. Do not clean directly with water or immerse in water. Ingress of water into the interior of
the device may cause a malfunction.
9. OPERATING INSTRUCTIONS
Description of operating statuses:
1. off: The plug is connected to power supply, the buzzer sounds, LED lights up for
a moment and the appliance is switched off.
2. standby: When the device is switched off, press the ON/OFF button. The screen will
display „ON” symbol. The device will turn off after 60 seconds. Any settings can be made
only before the lapse of 60 seconds.
3. boot:
Press FUNCTION/TIMER button in standby mode. The device will automatically
detect whether any dish has been placed on the plate.
If no suitable dish has been placed on the plate, the display will show a flashing
symbol „E0”, the buzzer will sound every 3 seconds with 10 loud sounds (for
a total of 30 seconds). After the dish is removed from the cooker, the device will
return to the standby mode. If a dish is placed on the plate within 30 seconds, the
device will automatically switch on in the corresponding operating mode.
4. off: To switch the device off, press the ON/OFF button. The device will signal the function
with a sound and will turn off.
Power function (manual)
1. Press the FUNCTION/TIMER button in standby mode or in operating mode to enter
power settings — the power indicator will light up, the default power of 1600 W will be set
and the LED display will show the value of 1600.
2. When in power function, turn the knob to adjust power (from 120 W up to 2000 W) to the
desired value — the device will display the corresponding changes.
3. In power function, press the FUNCTION/TIMER button again to select the
temperature function.
Temperature function (manual)
1. In the operating mode, press the FUNCTION/TIMER button to enter the temperature
16
