3
24
Remember!
Do not allow the brush to touch your scalp, so as to avoid burns.
7.4 USING THE CURLING BRUSH
1. Make sure that the voltage in the electrical power socket matches the
parameters listed in this user manual.
2. Plug the appliance into the power supply socket.
3. Turn on the appliance and select the blowing intensity.
4. The light indicator will lighten up.
5. To curl your hair, place a lock of hair no shorter than 5 cm on the brush. Then
curl your hair – stopping at the desired hair level. After about 10-20 seconds,
unwind your hair.
6. Repeat this step until you have curled the rest of your hair.
After styling, use hairspray to set the effect.
After every use, switch off the appliance, unplug it from the power supply socket
and leave it to cool down! Always remove all hair from the appliance thoroughly
after every use.
Warning!
1. If the appliance is hot, put it on a heat-resistant surface. Never cover the appliance
with a towel, clothes etc.
2.
Do not use the appliance on artificial hair.
3. Do not apply hairspray before using the appliance.
4. Never use the appliance on wet hair, only on damp or dry hair.
5. If the appliance is used on dyed hair, the bristles of the brush may change colour.
6. Do never touch your scalp with the appliance. Risk of burns!
7. Never place the appliance on a wet surface.
8. It is recommended that you do NOT straighten your hair over basins, bathtubs
or other water vessels.
9. Move the hair straightener only from the roots to the ends, never the other way
around.
10. Hair must be clean and dry. You should not wear hairbands, hairspray etc. when
using the appliance.
