[35]
EN
MINI PORTABLE AIR COOLER
•
Press the button (C10) on the control panel (C) or the On/off button (B1)
on the remote control (B). The appliance starts at the lowest speed and the
low-speed indicator light (C2) lights up.
• Select the desired ventilation mode on the speed selector button (C9) on
the control panel (C) or the speed button (B3) on the remote control (B):
minimum, medium or maximum. The speed level indicator light (C2) lights
up in the selected mode.
•
To switch the appliance off, press the On/off button (C10) on the control
panel (C) or the On/off button (B1) on the remote control (B).
• If you wish to move the appliance, or if you do not intend to use it for an
extended period of time, remove the plug from the power supply.
Timer
• When the appliance is in operation, you can select a period of time for the
appliance to switch off automatically.
• Press repeatedly the timer button (C3) on the control panel (C) or the timer
button (B6) on the remote control (B) to select the desired operation time
between 30 minutes and 7:30 hours. The timer indicator lights (C1) light
up indicating the selected time.
•
When the timer indicator lights (C1) are all off, this means no time has
been selected and the appliance will run continuously until it is turned off
manually.
Oscillation function
• When the appliance is in operation, press the swing button (C7) on the
control panel (C) or the swing button (B4) on the remote control (B) to
activate the right / left oscillation of the front grille. The indicator light for
the oscillation function (C4) lights indicating that this function is active.
• To deactivate the oscillation function, press tthe swing button (C7) on the
control panel (C) or the swing button (B4) on the remote control (B). The
oscillation indicator light (C4) goes out on the control panel (C).
Evaporative cooler function
• When the appliance is on, press the function selector button (C6) on the
control panel (C) or the cooler button (B5) on the remote control (B) to
activate the evaporative function and refresh the environment. The function
Summary of Contents for CPE-H039
Page 40: ......
