HOFFEN
EN
HOFFEN
27
Insert the dust container with the filter correctly installed into the dust
container slot so that the it clicks into place.
New EPA filters available for purchase from the manufacturer.
Contact: (+48 71) 71 77 400 or [email protected]
Dispose of used up filters in accordance with the local regulations.
CLEANING THE UV LAMP
The UV lamp is designed to eliminate various types of microorganisms
and mites from the cleaned surfaces. To work properly, it must be
cleaned regularly (preferably after each use) from dust, using a soft
bristle brush.
In case of impurities that cannot be removed with a brush, contact the
manufacturer's hotline or return the unit to service centre.
10. PROBLEMS
In case of problems with the device, please refer to the following tips.
I cannot
switch the
device on
Check the correct connection to the power supply.
Check the plug or power cord for damage.
Check whether the electrical outlet is damaged - select
another one.
Poor suction
power
Check the fill level of the dust container.
Check the dirt level of the filter.
Check that the suction hole or outlet openings are not
covered.
There is an
unpleasant
odour coming
out of the
device
The first time you start the machine, you may notice a
smell of plastic material that will disappear after a few
minutes of operation.
The UV lamp heats up and the dust that accumulates
on it can emit a specific smell. Remember to clean the
lamp with a soft brush after each use.
If the smell emitted from the appliance resembles the
smell of burning plastic, immediately disconnect the
appliance from the power supply and set it aside in a
