background image

HODEDAH 

®

www.Hodedah.com

DO NOT RETURN PRODUCT TO THE STORE

Phone

Website

Email

Questions, need parts, we are here to help!

WARRANTY

WARNING

If parts are missing or damaged please contact our customer service team and we will

gladly ship your replacement parts FREE of charge within 

ONE YEAR

 of purchase!

Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not

apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part

will be replaced without charge, subject to the terms and conditions described above.

Mon - Fri | 9:30 am to 5pm EST

Send us an email

FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY

Visit our website to open a case

1 - 855 - HODEDAH

1 - 855 - 463 -3324

[email protected]

www.Hodedah.com

·

This product contains small parts, keep away from children.

·

This product contains plastic bags, keep away from children.

·

Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.

·

Never allow children to climb or hang on drawers, shelves and doors.

·

Never open more than one drawer at a time.

·

The use of tip-over restraints may reduce but not eliminate the risk of tip-over.

Summary of Contents for HIF441-G























Reviews: