Hocom EQC Series, User Manual

Page: 10 / 14

EQC-Counting Scale
User Manual
<1> Press [ ALARM ] key to select -Lo- (showed
on UNIT WEIGHT LCD); then key in
9.500
(showed on WEIGHT LCD; then press
[
ALARM
] key again to confirm the setting.
<2> Press [ ALARM ] key to select -HI- (showed on
UNIT WEIGHT LCD); then key in
10.500
(showed on WEIGHT LCD; then press [ ALARM ]
key again to confirm the setting.
!! Notice : The setting value under PCS mode must
be
0
.
The scale will sound
beep
continuously while:
9.500
≦
the total-weight value
≦
10.500
3. Over-Weight Alarm:
Example: setup 10kg as the over-weight limit.
Press [
ALARM ] key to select -Lo- (showed on UNIT
WEIGHT LCD); then key in
10.000
(showed on
WEIGHT LCD; then press [ ALARM ] key again to
confirm the setting.
!! Notice : The setting values under PCS mode and
-HI-
mode must be
0
.
The scale will sound beep continuously when the
measured weight is
≧
10.000kg
.
9