FIRElink-100 – Installation Manual
Page 15 of 40
©
2010 Hochiki Europe (UK) Ltd
9-5-0-345/ISS4/OCT10
1.12.2 Chart Recording Rate
This function controls how frequently the detector and alarm level or flow rates are stored in the FIRElink-
100’s internal chart recorder log (see section 1.14, ‘Chart Recording’ on page 18).
Setting
Type
Storage Interval
Time per Division on Chart Log
0
Detector Output
1 second
10 seconds
1
Detector Output
5 seconds
50 seconds
2
Detector Output
12 seconds
2 minutes
3
Detector Output
30 seconds
5 minutes
4
Detector Output
1 minute
10 minutes
5
Detector Output
2 minutes
20 minutes
6
Detector Output
5 minutes
50 minutes
7
Detector Output
10 minutes
100 minutes
8
Detector Output
20 minutes
200 minutes
9
Detector Output
50 minutes
500 minutes
10
Flow Recording
1 second
10 seconds
11
Flow Recording
5 seconds
50 seconds
12
Flow Recording
12 seconds
2 minutes
13
Flow Recording
30 seconds
5 minutes
14
Flow Recording
1 minute
10 minutes
15
Flow Recording
2 minutes
20 minutes
16
Flow Recording
5 minutes
50 minutes
17
Flow Recording
10 minutes
100 minutes
18
Flow Recording
20 minutes
200 minutes
19
Flow Recording
50 minutes
500 minutes
In the above table the shaded cells indicate flow rate recording whilst the white cells indicate detector and
alarm level recording.
At the slowest recording rate, one month of data can be recorded. The factory default setting is 8.
1.12.3 Separator
Condition
The value given at this function is the efficiency rating of the dust separator element in the detector as a
percentage of the efficiency of a clean separator. A new element will give a reading of 99 in this function.
When the efficiency has decreased to 80%, the Fault indicator LED will illuminate and the event log will
show “Separator renew”.
NOTE: Fitting a new element will reset this figure to 99
1.12.4 Separator Change Date
This function defaults to “--“, which means that a separator fault will only appear when the efficiency
decreases to 80% (see 1.12.3, “Separator Condition”). However, a date may be entered into this function
