6
2.2. Mounting and removing the detector
The detector can be fixed to the metal bracket by hooking the detector body to the four
prongs of the mounting plate and then by sliding down firmly until the detector is locked
into place and then locking using the locking screw. (see Figure 1).
Removal of the detector can be achieved by slackening the locking screw and pressing the
locking mechanism located on the bottom left hand side of the detector housing. Whilst
pushing the locking mechanism with either a narrow rod or screw driver the detector is
lifted upwards until it disengages from the mounting plate.
Mounting Plate
Expanded View
Detector Housing
Expanded View
Slide Down
Locked
Locking Screw Location
Locking Screw Location
(side view)
Front Cover Hinge
Mounting Plate
A
B
A: After mounting the detector to the mounting plate, install the rocking screw.
B: Prevents removal of the detector from the mounting plate.
Figure 1 Locking mechanism
