Copyright HCE 2010 - www.hobie-cat.net
If you do not have the gennaker option on your boat, go to page 25.
Illustration
Steps
Description
1
Install the rope that goes round the top of the mast.
Take the rope and tie a knot at the end.
2
Feed the other end into the hole as shown on the
photograph.
Lead the rope under the mast and feed it through
the second hole above the other.
4
Tie a knot at the end.
Copyright HCE 2010 - www.hobie-cat.net .../...
Ref : MM_ICAT
Issued by : AR
Date : 05/2010
Up-date : 0
Page : 2/
HOBIE ICAT
ASSEMBLY MANUAL
Preparation of the mast : Mast wiring for the gennaker (option)