Copyright HCE 2010 - www.hobie-cat.net
Place the mast onto supports (trestles) if possible at about 80 cm from the ground, so as not to strain your back while
rigging the mast, leaving enough room to go all the way around the mast.
Illustration
Steps
Description
1
Take the spreader bar kit + the screw
adhesive tape.
2
Find the aluminium spreader bar fittings on the
mast.
Insert the end of the fixed part of the spreader bar
in the back mast fitting and insert the screw.
4
Put the bolt on and tighten with the spanner
Copyright HCE 2010 - www.hobie-cat.net .../...
Ref : MM_ICAT
Issued by : AR
Date : 05/2010
Up-date : 0
Page : 19/
HOBIE ICAT
ASSEMBLY MANUAL
Preparation of the mast : Spreader bars