3
2
Install cheek blocks to boat using the 1” and
1/2” screws. Make sure the blocks are facing
inwards. Feed the Trolley Line through the top
of the blocks and exit the bottom. Tie each end
of the line to the rings on the shock cord. The
shockcord assembly should travel on the bot-
tom trajectory. Make sure there is tension in
Rings on Bottom
Check the areas cirlced in the diagram to the
right. If you have a hexagon brass piece exposed,
pry off the plastic caps and skip to the next step. If
you don’t have the brass parts, continue with the
instructions below.
3
Trim excess line.
