HobbyKing YEP Series Instruction Manual Download Page 3

For the Advanced Setup, the Basic Setup must have been performed at least once! 

1. Make sure that the ESC is off; switch on the transmitter with the throttle stick at full power.

2. Hold the Model, Connect the ESC with motor and battery => a monotonous continuous beep

should be heard.

3.

♪♪♪♪♪♪♪♪

....: after approximately 20 tones, the advanced setup is activated as long as the

basic setup has been performed! 

Acknowledgement  

 => Advanced Setup  

If the continuous beeps are not heard, please disconnect immediately the battery from 
the ESC and 

try again

. Place the transmitter 

within range of the 

receiver if the antenna is 

not extended.  
In the advanced setup only ONE Menu option can be selected

  at  a  time

, therefore the 

main menu choice must take place first:  

Place the stick again into full back position to select the main me

nu

 to modify:  

Main Menu Options overview:  

Brake

♪♪

 

Battery-Typ

e

♪ ♪

 

 

Timing

♪ ♪

 

 

 

PWM-Frequency

♪ ♪ ♪

 

 

   

Governor mode

Move the stick to full power after hearing the sounds for the desired parameter.

Acknowledgement: 

 

 

Note: 

If any parameter has not be selected, the menu will begin again with “Brake” and so on

 

(i

f  selected

)

,  depending  upon  the  selection  now  the  ESC  switches  to  the  setting  of  the 

Parameter. Possible (sub) menus:  

1 Brake (

)

Brake selection 

(Brake):  

Move stick into full back position again 

No Brake

♪♪

 

Brake, Brake is activated if stick range has been configured accordingly.

Move the stick to full power to select the desired setting in the submenu.  Acknowledgement: 

 

 

After the acknowledgement the menu option is programmed!     

Reviews: