14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
4.0 Main Controller Set Up Guidelines
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AUX1 IN: connect to receiver AUX1 port
Servo 1: connect to servo 1
Servo 2: connect to servo 2
Servo 3: connect to servo 3
Servo 4: connect to servo 4
THRO OUT: connect to ESC
RUDD IN: connect to receiver RUDD port
AILE IN: connect to receiver AILE port
THRO IN: connect to receiver THRO port
ELEV IN: connect to receiver ELEV port
ELEV G.S: Lift (front and back) gyroscope sensitivity adjustment knob, to increase by clockwise (+), Will increase the front and back
balance effect of the fuselage (fuselage steady is the best); reverse to reduce the balance effect.
AILE G.S
：
Aileron (left and right) gyroscope sensitivity adjustment knob, to increase by clockwise (+), Will increase the left and right
balance effect of the fuselage (fuselage steady is the best); reverse to reduce the balance effect.
ELEV/AILE EXT
：
Lift (front and back)/Aileron (left and right) Servo stroke ATV adjustment knob, to increase by clockwise (+), servo
became more sensitive; reverse is more slow.
Setting mode switch: WK is flight mode; ADJ is debug mode, can not fly in this mode.