7. Electrical Installations 101
The van's engine must be turned off before the 230V
mains connection is hooked up.
Only plugs and cords that comply with CEE standards
may be used.
To disconnect the electric connection:
• Switch off the automatic circuit breaker
j
by pressing the
rocker switch down
k
.
• Remove the CEE plug
m
(
p. 100)
.
• Press the cover flap
k
of the external socket
(see also p.
41)
down until it clicks into place.
1
The 230V system is protected by a two-pole 13 A automatic cir
-
cuit breaker
j
, which is located in the seat chest in the seating
arrangement. It can be accessed via the side compartment.
Fuse protection for the 230V system
2
Automatic circuit breaker with FI ('fast interrupt') switch
