7. Electrical Installations 113
The mobile home's engine must be turned off before the
230V mains connection is hooked up.
Only plugs and cords that comply with CEE standards
may be used.
To disconnect the electric connection:
• Switch off the automatic circuit breaker
j
by pressing
the rocker switch down
k
.
• Remove the CEE feeder plug
m
.
• Press the cover flap
k
of the external socket down until
it clicks into place.
Supply via mains connection
The mobile home is connected to the external 230V mains by
means of the CEE external socket
j
located on the side wall.
To connect the CEE feeder plug
• Switch off the automatic circuit breaker
j
(p. 114)
by
pressing the rocker switch
k
down
(p.114)
.
• Grasp the bottom of the cover flap of the CEE external socket
k
and flip it up (
see also p. 39
).
• Completely unwind the connector cable.
• Open the cap of the CEE feeder plug
l
by pulling it up in a 90°
angle.
• Insert the plug
m
until it locks into place.
• Switch the automatic circuit breaker
j
(p. 114)
back on.
4
1
2
3
Connected 230V feeder plug