manualshive.com logo in svg

Hobby Caravan Series, Handbook

Share
Download
Hobby Caravan Series Handbook Download Page 59

07-3

 

 

Secondary panel 1

Sleeping area

Push-button

   

Function

Left

   

 

 

On/off switch for mounted spotlight on left side of bed.

 

 

 

 

Holding the push-button activates the dimmer function.

 

 

 

 

Light increases and decreases.

Centre

  

 

 

On/off switch for ceiling lamp over suite.

 

 

 

 

Holding the push-button activates the dimmer function.

 

 

 

 

Light increases and decreases.

Right   

 

 

On/off switch for mounted spotlight on right side of bed.

 

 

 

 

Holding the push-button activates the dimmer function.

 

 

 

 

Light increases and decreases.

Push-button   

Function

Left

   

 

 

On/off switch for mounted spotlight above Porta Potti portable toilet.

Centre

  

 

 

(no function)

Right 

 

 

 

On/off switch for washroom lamp.

Secondary panel 2

Washroom

Remote control

 

 

 

 

The remote control allows you to operate the service panel according 

 

 

 

 

to your needs.

 

 

 

 

(Not part of standard equipment; available as an extra)

Summary of Contents for Caravan Series























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands