9
5.4 Nocturnal temperature programming
When
and
is flashing and you want to keep having the same tem-
perature at day and night press
button to go to the next setting.
When you wish to have a different night temperature, press
.
is
displayed and
flashes. Use the
and
buttons switch the night
function from
to
If was set and acknowledged with
, the presetting value or your
last programmed value flashes in the display ( is displayed on the left, at
the right below site). Set the desired start of night time in hours with the
or
button, then acknowledge with
.
Presetting value or your last programmed value flashes in the display. ( is
displayed on the left, at the right below site)Set the desired start of night
time in minutes with the
or
button, then acknowledge with
.
Presetting value or your last programmed value flashes in the display (
is displayed on the left,
at the right below site). Set the desired end of
night time in hours with the
or
button, then acknowledge with
.
Presetting value or your last programmed value flashes in the display. (
is displayed on the left,
at the right below site). Set the desired end of
night time in minutes with the
or
button, then acknowledge with
.
Presetting temperature
or your last programmed value flashes in the
display ( is displayed on the left, at the top right site). Set the desired
night temperature with the
or
button, then acknowledge with
.
Please note:
When the night beginning time is reached the display
shows the measured temperature and left below.
