11
7. Factory Presetting
After the event of a power failure, the HOBBY Biotherm eco starts with the
factory presetting again.
clock setting:
12:00
single/toggle mode:
single mode
temperature:
25 °C
night temperature:
OFF
temperature Alarm:
off
8. Source of Fault
In the case of a problem, first reset to the factory settings. If this does not
solve the problem, please search for the fault in the following table:
In the event of a warranty or repair issue, please please return to where
purchased.
9. Technical Specifications
Operating voltage:
230 V, 50 Hz
Load capacity:
Max. 2,000 W (ohmic load)
Temperature display range:
-9.9 °C – 99.9 °C
Temperature control range:
10 °C – 60 °C
Temperature alarm range:
+/- 0.1 °C – 10 °C
(00 means ‘no alarm’)
Temperature display accuracy:
0.1 °C
Error
Possible cause
Solution
is displayed
sensor fault or short circuit
in the temperature sensor
repair required
