6
Antenna
Switch
Analog Servo
Digital Servo
The status indicator is used to indicate the power and working status of the receiver.
1. Off: The power is not connected.
2. Lit in red: The receiver is on and working.
3. Flashing slowly: The bound transmitter is off signal is lost.
CONNECTORS
Used to connect to the model and servos.
RECEIVER OVERVIEW
RECEIVER CONNECTION
STATUS INDICATOR
Connectors
1. Steering servo (CH1)
2. Throttle servo (CH2)
3. CH3 servo (CH3)
4. CH4 servo (CH4)
5. CH4 servo (CH5)
6. CH4 servo (CH6)
7. CH4 servo (CH7)
Connector motor
Connector battery
Power switch On-/Off
Steering servo Channel 1
(not included)
Electronic speed controller
(not included)
Additional
channels
ATTENTION
Make sure that male and female
connectors have the correct polarity!
Receiver make sure to
connect in correct direction.