11
B
C
D
A
Make sure to disconnect the receiver power before turning off the transmitter.
Failure to do so may lead to damage or serious injury.
Danger
SYSTEM INTERFACE
OPERATING PROCEDURE
• After operation: Disconnect the battery from the control unit. Turn the receiver off, and then the transmitter.
• Before and after operating the transmitter, make sure that trim is in the desired place and that all checks have
been made.
The main interface mainly displays information related to the model, such as transmitter voltage,
function status and so on.
CCS Speed
Battery Voltage
Temperature
RBU
LFU
Current Model Number
Crawling Mode D
Crawling Mode C
Crawling Mode A
Crawling Mode B
Sec Stopwatch
• Before operation: Connect the drive battery to the control unit. First turn on the transmitter, then the receiver.
Many publications say that the setup sequence for the transmitter and receiver don’t play a role anymore with
2.4 GHz sets. However, we recommend sticking to the sequence typical for previous sets.