Please read all instructions carefully before assembly and flight!
Thank you for purchasing the F-86. This model is designed for the intermediate to advanced
flyer. The model is receiver ready and includes everything that you need to assemble and fly
your F-86, except for the radio transmitter and receiver. Please read the following instructions
carefully, assembly is easy and should only take an hour or so.
Main Specifications
Wingspan:
27-1/2”
(700mm)
Fuselage length:
27-1/2”
(700mm)
Flight weight:
16-1/2 oz.
(470g)
64mm EDF
4300KV out-runner brushless motor.
3-cell, 11.1V, 1600mAh 20C lipo battery genuine Deans Ultra Connector
30A ESC w/ BEC and genuine Deans Ultra Connector
3pcs. 9g Servo
No Landing gear
Required but not included
Radio System with minimum 3-channel Transmitter and Receiver
Battery charger capable of charging a 3-cell Lipo battery
Safety Statement
1. This is not a toy. It is for experienced modelers only. You are responsible for the safe
operation of this model and any damage or harm it may cause.
2. Before flying the F-86 for the first time please read through the instructions carefully and
make sure that your radio equipment is working properly and has been range tested prior to
flight.
3. Young people under the age of 14 should only be permitted to operate this model under
the instruction and supervision of an adult with modeling experience.
4. Please keep these instructions for future reference after completing model assembly.
They contain information critical to the safe operation of this model.
5. If you have any further questions regarding the safe operation of your RC model, please
contact your local hobby shop or flying club or Hobby-Lobby International for professional
help and advice.
Summary of Contents for HLI8601 F-86 Sabre Skyblazers
Page 1: ......
