10
34. From the
D/R & EXPO
screen, select the
RUDD
function. Set the dual rate switch
for the elevator to the “0” POSITION. Set
the EXPO for +20 % to make the rudder
less responsive around the stick center.
Set the D/R to 100%.
35. Select
PROG.MIX1
from the radio menu.
Set the mix for
ELEV
to
FLAP
. Make sure
that the rates are both at -100% and that
the switch is set to
MIX
. There should be
no offset for this mix.
36. Select
PROG.MIX2
from the radio menu.
Set the mix for
ELEV
to
AUX2
. Make sure
that the rates are both at +100% and that
the switch is set to
MIX
. There should be
no offset for this mix.
37. Select
PROG.MIX3
from the radio menu.
Set the mix for
AILE
to
FLAP
. Make sure
that the rates are both at -100% and that
the switch is set to
ON
. There should be
no offset for this mix.
Summary of Contents for eRC F-18E Super Hornet 90mm EDF
Page 1: ...1 ...
