Step 9: Installation of Fan Cover
Parts List
Fan Shroud (1)
Self Tap Screws (4)
Install the fan cover into the frames
using 4 provided self tapping screws
(the fan cover may need adjustment
later for maximum cooling). The
mounting holes for the fan cover are
the slots in the frames. Once you
have your fan shroud in its final
placement use some thick CA to
ensure that the screws don't come out.
Step 10: Installation of Motor Mount to Motor
Parts List
30 Size Motor (not provided) (1)
Motor Mount (1)
3 X 12mm Cap Head Bolts (4)
Attach the motor to motor mount
The motor mount is symmetrical so
all you have to do is line up the
holes and tighten the bolts.
Step 11: Installation of Fan Hub
Parts List
Upper Fan Collet (1)
Lower Fan Collet (1)
Fan Hub (1)
Fan (1)
3 X 6mm Phillips screws (4)
Install lower fan collet by removing drive washer,
but leave the 1mm spacer provided under drive
washer in place. Install the brass conical fan collet.
Now install the fan to the fan hub using 3 X 6
Phillips flat screws. Install the fan hub & fan
assembly over the brass collet. Install upper fan
collet and Nord-lock washers over crank-shaft.
Lastly, locktite the prop-nut in place and tighten
using the HHI piston headlock.
