❏
3. Replace the thumbnut and tighten firmly.
INSTALL THE RECEIVER BATTERIES
❏
1. Place the Paradise sailboat on the stand. Twist the hatch
lock knob and remove the forward hatch as shown.
❏
2. Install 4 fresh “AA” batteries in the configuration molded
into the battery holder. Leave the hatch open for now.
INSTALL THE MAST AND SAILS
Note:
The snap rings and eyelets have been numbered for
identification only; the lines do not need to be attached in
numerical sequence.
❏
1. If you have not already done so, remove the mast and
sail assembly from its packaging and remove the tape
securing the rigging lines. Insert the bottom of the mast into
the mast base.
5