❏
2. Insert a medium sized screw to hold the landing gear
in place.
❏ ❏
1. Insert the long metal joiner in the hole closest to the front
of the wing. Make sure it angles up as shown.
❏ ❏
2. Insert the short metal joiner in the hole closest to the rear
of the wing. Make sure is angles up as shown.
❏ ❏
3. Align the joiners with the holes in the outer wing section
and slide the two wing sections together. Be sure the wing sections
fit snugly with no gaps between them.
❏ ❏
4. Tape both top and bottom of the joint between the two
wing sections. make sure there are no gaps between the wing
sections.
❏
5. Repeat the steps 1-4 to attach the other wing tip.
❏
1. Install the 8 AA batteries in the transmitter. Switch on the
transmitter and check the LED’s on the front of the transmitter.
Like a traffic light, green means “GO!” However, if the red LED
is flashing, you need to install fresh batteries.
RADIO ADJUSTMENT
ASSEMBLE THE MAIN WING
8
